Raised block paving surfaces and wooden terraces offer a practical way to create a modern garden without relying on a perfectly flat concrete base. Thanks to adjustable pedestals, designers can build level outdoor surfaces over uneven ground, manage height changes and create clean transitions between different garden zones.
For homeowners, landscape architects and garden designers, this opens up many possibilities. From minimalist stone patios to floating wooden platforms — here are some modern garden design ideas and details about the support worth considering before starting construction.
1. Create a minimalist stone terrace
Minimalist stone terraces are a popular choice for modern gardens. Large-format porcelain pavers, natural stone slabs and simple geometric layouts create a neat look without making the garden feel cluttered.
This design works particularly well in smaller gardens, where a consistent paving pattern can make the space feel more open. Neutral colors such as grey, beige and warm stone tones also combine well with the greenery of plants and wooden details.
A raised deck surface makes it easier to achieve this finish when the existing substrate is uneven. Adjustable pedestals support each corner of the paver and allow installers to precisely adjust the final height without building thick mortar beds.
As a manufacturer of adjustable pedestals, we know that small details matter here. Pedestal spacing, paver dimensions, load-bearing capacity and head compatibility all affect how stable the finished surface will be.
A common mistake is assuming that large paving slabs can bridge any gap between supports. They cannot. The support layout must comply with the paver manufacturer's recommendations. Weak support can lead to rocking pavers, cracked corners and uneven joints.
2. Construction of a raised deck terrace made of wood
A raised deck terrace made of wood creates the impression that the outdoor platform floats slightly above the garden. This effect works particularly well around lawns, flower beds, seating areas and garden doors.
Instead of building a traditional terrace directly on the ground, installers can use adjustable pedestals to support a wooden or composite substructure. The joists rest on dedicated pedestal heads, creating a level structure above the existing surface.
This approach is useful when the garden has a slight slope or when the client wants to avoid extensive earthworks.
For this type of project, pedestals from the Raptor series by SOLVER are designed for installing terraces based on joists. They provide a practical support solution for wooden and WPC terrace substructures.
However, a raised deck terrace still requires proper planning. Joist spacing, pedestal layout, ventilation and structural loads must all be considered together. If the supports are too far apart, the terrace may sag when people walk on it. If the space under the terrace is poorly ventilated, moisture can become a long-term problem.
The finished terrace should look simple, but the structure beneath it should never be an afterthought.
3. Combine pavers and decking boards in one garden
Why choose between stone and wood when both materials can work together?
Mixed-material gardens are a good option for homeowners who want different outdoor zones without dividing the garden with walls or fences. For example, porcelain pavers can mark out the dining area, while a wooden deck creates a warmer space for relaxing.
The contrast between smooth stone and natural-looking wood gives the garden more character. It also helps separate functions while keeping the whole design consistent.
Adjustable pedestals make planning such combinations easier, because both surfaces can be installed as raised systems. The installer can adjust the support height to bring both materials to the correct finished levels.
And this is where accessories play an important role. Leveling shims help correct small height differences and improve the alignment of supported surfaces. Height couplers increase the working height when a deeper raised floor is needed. Support grids can provide additional support for compatible paver layouts.
Transition strips and edge strips help finish exposed boundaries and transitions between materials.
Without properly finished details, the junction between decking boards and pavers can become uneven. A poorly planned transition can also create a trip hazard or leave an unsightly gap where dirt and water collect.
4. Design multi-level garden platforms
Not every garden has to be completely flat. Different levels can actually make an outdoor space more interesting and practical.
A multi-level garden might include a raised dining terrace, a lower seating platform, and a separate terrace around the planting area. Each level serves its own function while creating a natural flow through the garden.
This idea works particularly well in sloped gardens, where creating one large flat surface might require significant excavation or retaining structures.
Adjustable pedestals can help installers create level platforms at different heights. Instead of following the slope of the original ground, each platform can be adjusted to the planned target height.
The challenge is the transition between levels. Steps must have consistent dimensions, stable support, and proper edge finishing. Differences in pedestal heights should not be treated as a substitute for properly designed steps.
SOLVER adjustable pedestal systems can form part of such raised platforms, however the appropriate support layout depends on height, material, load, and local building requirements.
For taller structures or significant level changes, additional structural design may be necessary.
5. Add a raised relaxation zone among garden plants
A raised relaxation platform can turn an unused corner into a comfortable outdoor resting spot. Instead of covering the entire garden with paving, create a smaller terrace or paved area surrounded by ornamental grasses, shrubs, and low-maintenance plants.
This works especially well in small gardens, where every square metre must have a clearly defined purpose.
A raised platform also helps separate the relaxation zone from the surrounding soil and flower beds. The space underneath can allow for drainage and ventilation, provided the system is properly designed.
For lower platforms on relatively flat, well-drained ground, a basic pedestal layout with standard accessories is sufficient. There is no reason to complicate a simple installation.
It is important to check the target height, pedestal spacing, and edge conditions before installation. An unsupported perimeter may shift over time, especially where people regularly sit or step onto the platform.
What to consider before building a raised garden surface
The appearance of a raised garden surface is only one part of the project. The support system must be adapted to the actual conditions on the site.
Here are six factors worth checking before choosing pedestals and accessories.
1. Ground and subsoil conditions
Start by checking what is beneath the planned surface. Is it concrete, compacted gravel, an existing terrace, or natural soil?
A stable, flat concrete base is usually straightforward to work with. Uneven concrete may require the use of adjustable pedestals with an appropriate height range.
Soft ground requires more attention. Pedestals should not simply be placed on loose or unstable ground. A properly prepared, load-bearing base is essential to prevent settling.
2. Expected loads
A garden terrace used for occasional seating has different requirements than a platform supporting heavy garden furniture, planters or a hot tub.
Check the load capacity of the pedestal and consider how loads are transferred through the surface and substructure. Also take into account concentrated loads, not just the overall weight.
As a manufacturer, SOLVER offers various pedestal series for different installation requirements. For example, the MAX series is intended for heavy-load applications, while the RAPTOR series is designed for joist-based terrace systems. Always check the relevant technical documentation before specifying a product.
3. Drainage and water runoff
Water must have somewhere to drain away. A raised paver or deck board installation system can create space for drainage beneath the finished surface, but it does not automatically solve water runoff problems.
Check the existing ground slope, drainage points, waterproofing, and the direction of water flow. On roof terraces or structures with waterproof insulation, avoid blocking drainage points or damaging the membrane.
4. Planned height
Measure the difference between the existing substrate and the desired finished surface.
Low installations may only require standard adjustable pedestals. Higher installations may require extensions or a different range of pedestals.
Height also affects lateral stability, edge finishing, access, and how the surface connects to doors, stairs, and existing pathways.
5. Surface material
Porcelain pavers, natural stone, wood and WPC composite boards have different support requirements.
Check the material manufacturer's installation guidelines, including the permissible support spacing, minimum thickness and any requirements for intermediate supports.
The pedestal head must also match the installation. A paver head designed for terrace pavers is not automatically suitable for supporting deck joists.
6. Suitable accessories
Accessories help complete the installation and solve specific conditions on site.
- Leveling shims: They help correct minor height differences and improve surface alignment.
- Extensions: They increase the pedestal height when the required finished surface level exceeds the standard adjustment range.
- Support grids: They provide additional support for compatible surface systems and help with specific layout requirements.
- Edge profiles: They give exposed edges a cleaner, more finished look.
- Transition profiles: They help create aesthetic connections between different surface materials or levels.
These accessories should work together as part of one planned system. At SOLVER we manufacture adjustable pedestal systems and accessories for various raised floor applications. When reviewing a product card, check compatibility, adjustment range, material specification and load capacity, rather than choosing accessories based on appearance alone.
Choosing the right raised bed system
Not every modern garden requires a complex raised flooring solution.
For a small terrace on flat, stable and well-drained concrete, standard adjustable pedestals and basic accessories may be entirely sufficient. A larger garden with multiple levels, soft ground, heavy planters or a significant slope requires more careful planning.
Climate also matters. Freeze-thaw conditions, prolonged rainfall, temperature changes and material movement can affect the long-term performance of an outdoor installation. Local building regulations may also apply, particularly with regard to raised platforms, stairs, balconies and rooftop terraces.
As a manufacturer of SOLVER adjustable pedestals, we develop systems for various surface materials, installation heights and structural requirements. The best starting point is always the installation site itself, followed by the appropriate pedestal type and compatible accessories.
Final conclusions: Plan support before the surface
Modern garden design is about making outdoor spaces look good while being practical to use. Raised surfaces and terraces make it possible to create clean-lined patios, floating timber platforms, mixed-material terraces and multi-level garden zones without the need for perfectly level ground.
But a good-looking surface requires reliable construction underneath.
Before ordering materials, sketch the garden layout and mark the places where water collects, where the ground is sloped and where different surface levels will meet. Measure the required installation heights and determine the expected loads.
Then match each condition to the appropriate pedestal, head type and accessory set.
A little planning before installation can prevent many problems after the first winter.