That is precisely why the layout of pedestals deserves attention before installation begins. A well-planned layout helps distribute the weight evenly, maintains the stability of the surface and deck boards, and allows water to drain from the surface as intended. It also makes installation easier, because the most important dimensions and adjustments have already been taken into account.
As a manufacturer of adjustable pedestals, we understand that no two terrace projects are identical. Paver dimensions, ground conditions, anticipated loads, and drainage requirements all influence the final layout. A simple grid may work perfectly in one garden, while another project requires additional supports, a different spacing, or careful height adjustments.
Here are the main steps to consider before ordering materials or laying the first paver.
1. Start with measuring and planning the terrace surface
Before you decide how many pedestals you need, establish the exact dimensions of the surface.
Measure the length and width of the terrace, taking into account all corners, narrow sections, steps, edges and changes of direction. If the project has an unusual shape, draw a simple plan showing the full outline instead of relying on a single overall measurement.
Then mark the location of important elements, such as:
- Drains and drainage channels.
- Walls, doors and thresholds.
- Existing garden structures and planting zones.
- Changes in ground level.
- Places where heavier furniture or equipment is planned.
This drawing becomes the starting point for planning the pedestals.
For example, imagine a rectangular terrace measuring 6 metres by 4 metres. A simple grid of pavers can be drawn across the entire surface, showing where each paver will lie and where its pedestals will be placed.
Planning the surface in advance helps avoid awkward situations later, such as placing a pedestal directly over a drainage channel or discovering that the last row of pavers does not fit flush against the wall.
It also provides a useful reference when calculating material quantities and discussing the project with the manufacturer of adjustable pedestals.
2. Match the pedestal layout to the paver dimensions and joint pattern
Once the terrace dimensions are clear, decide which terrace pavers or decking panels will be used.
This is important because the pedestal layout should result from the dimensions and support requirements of the surfacing material, rather than being merely an evenly distributed grid across the entire substrate.
For typical square terrace pavers, pedestals are usually placed under the corners, at the points where four pavers meet. Each paver corner receives support from the same pedestal head, provided the system is designed for this.
For larger pavers, additional support points may be necessary. Some manufacturers recommend additional supports under the center or along the edges of larger surfacing elements, depending on the paver thickness, dimensions, strength, and anticipated load.
Decking systems may require a different approach. Decking boards are usually supported on joists, so the pedestal layout must correspond to the joist arrangement, not the visible joints between the boards.
It is worth checking a few practical points:
- Confirm the exact dimensions of the paver or panel before setting out the grid.
- Take into account the intended joint width between the surfacing elements.
- Check how the pedestal head aligns with the joint pattern.
- Identify the locations where additional support may be required.
- Plan edge and corner supports separately from the main grid.
As a manufacturer of adjustable pedestals, we recommend checking the product installation instructions before finalizing the spacing. A standard layout may be suitable for ordinary surfacing, but larger or heavier pavers may require a different support arrangement.
Working this out on paper is far easier than lifting a finished surface to add missing supports.
3. Account for terrain slope and existing levels
Outdoor surfaces are rarely perfectly flat. Even a garden that appears level may have slight height differences along its length.
Before laying out the pedestals, measure the existing ground levels at several points. A laser level or appropriate surveying equipment can help identify the highest and lowest areas.
This information helps determine the required adjustment range of the pedestal system.
For example, a terrace built on a slightly sloped concrete base may require pedestals of different heights to achieve a consistent finished surface. Adjustable pedestals make this possible without having to level each low area with improvised materials.
However, there is an important difference between correcting minor level differences and dealing with unsuitable ground.
Pedestals should stand on a stable, suitable load-bearing surface. Loose soil, soft ground and areas that settle under pressure may require proper preparation before installing the pedestal system.
If the height difference exceeds the adjustment range of a standard pedestal, extensions or another suitable support arrangement may be necessary.
Planning the levels in advance also helps avoid sudden height changes near doors, steps and adjacent garden paths.
4. Plan drainage before finalizing heights
Drainage is one of the most important elements of terrace planning, especially in outdoor environments exposed to regular rainfall.
A raised paving system allows water to penetrate through the joints and move beneath the finished surface. This can help reduce water pooling on the terrace, but only if the sub-base drainage layout has been properly accounted for.
Before installing pedestals, determine where rainwater should drain. Check the direction of the existing ground slope, the location of drains, and whether water can freely drain away from beneath the raised surface.
When planning, several questions should be answered:
- Does the substrate already have a suitable slope to ensure drainage?
- Are existing drains accessible?
- Could walls or raised edges trap water?
- Will pedestal bases conflict with drainage channels?
- Is there sufficient clearance beneath the finished surface for water flow?
Remember that a level finished terrace does not necessarily mean a completely flat substrate. The finished surface can be horizontal while the surface beneath it maintains an appropriate drainage slope, depending on the design.
This is particularly important in regions with heavy seasonal rainfall. Poor drainage planning can leave water trapped beneath the surface, potentially contributing to staining, algae growth, substrate degradation, or other long-term problems.
The pedestal layout should therefore work with the drainage design, not against it.
5. Check the substrate and calculate the expected load
Before determining the final number of pedestals, consider what the load-bearing substrate and the finished terrace will need to support.
Start with the substrate. Concrete, compacted aggregate, waterproofed surfaces and prepared ground have different requirements. The load-bearing surface must be suitable for the intended pedestal system and the expected loads.
Next, take into account the weight placed on the terrace.
This includes more than just the terrace pavers. Think about:
- The weight of the terrace material or boards.
- Garden furniture and large planters.
- Built-in seating and garden features.
- Outdoor kitchens and other permanent fixtures.
- Concentrated loads from heavy objects or machinery.
A terrace designed for ordinary garden furniture has different load requirements than a terrace that will support a large outdoor kitchen or a hot tub.
This is where the manufacturer's technical information becomes particularly useful.
As a manufacturer of adjustable pedestals, we recommend reviewing the product's declared load capacity, adjustment range, base dimensions and installation limitations before choosing the spacing layout.
Do not assume that the maximum load of a single pedestal automatically determines the safe load capacity of the entire terrace. The complete system also depends on the strength of the boards, the position of the supports, the load-bearing capacity of the substrate, the load distribution and the quality of installation.
If concentrated or unusually large loads are expected, the layout should be verified in accordance with the manufacturer's technical guidelines and, if necessary, consulted with a qualified structural specialist.
6. Calculate how many pedestals the project needs
Once the paver layout, ground levels and load requirements have been established, you can start calculating the quantity.
For a simple rectangular terrace with square pavers, the first estimate is based on the number of joints between the pavers and the shared support points.
For example, a terrace with four pavers in width and three pavers in depth will have a grid of five support positions in width and four positions in depth.
This gives:
5 × 4 = 20 pedestal positions.
However, this is only a basic example. The actual quantity may increase if the pavers require intermediate support points, the perimeter requires additional support points, or the project includes steps and irregular sections.
Projects with decking also require separate calculations based on the joist direction, joist spacing and the manufacturer's recommendations.
It is better to calculate the layout carefully than to order based on a rough estimate per square metre. A shortage of pedestals halfway through the installation can interrupt the project and lead to inconsistent support solutions.
Appropriate spare components should also be included, particularly when working with complex terrace shapes.
7. Leave room for maintenance and future adjustments
One detail that is easy to overlook is what happens after the terrace construction is finished.
Outdoor surfaces are subject to changing conditions. Temperature fluctuations, moisture, ground movement and normal use can affect the support system over time.
For this reason, the pedestal layout should allow for future inspection and adjustment.
Think about where the drains, inspection points and service connections are located. If these areas become completely inaccessible under fixed structures, routine maintenance can become difficult.
A removable terrace paver or an accessible section can provide a practical solution.
It is also worth checking whether the chosen pedestal system allows for height adjustment after initial installation, if required. Some systems provide access through the joints between pavers, while others may require lifting individual pavers.
As a manufacturer, we encourage installers to consider maintenance access at the design stage, rather than treating it as an afterthought.
A terrace that is easy to inspect and adjust is generally easier to maintain throughout its service life.
8. Review the complete layout before installation
Before ordering or starting installation, gather all planning decisions together.
Look at the terrace drawing and check that every paver or deck board section has an appropriate support layout. Confirm the pedestal spacing, required height range, drainage direction, suitability of the substrate, and expected load.
The final review should include:
- Terrace dimensions and paver grid.
- Pedestal positions at joints, corners, and additional support points.
- Edge and perimeter support requirements.
- Ground slope and finished surface level.
- Drainage routes and access points.
- Product load capacity and adjustment range.
- Total quantities of pedestals and accessories.
This is also a good moment to compare the proposed layout with the technical guidelines provided by the adjustable pedestal manufacturer.
A standard grid is often a sensible starting point for a regular terrace on a stable, well-drained substrate. However, unusual paver dimensions, significant slopes, heavy loads, and difficult ground conditions may require a more detailed layout.
Taking the time for this final check can prevent unnecessary adjustments once the surface is already laid.
See also: Clever Level 80-200 mm pedestal, 3 mm for tiles & decking
Final conclusions: Good pedestal placement starts on paper
A stable terrace does not begin the moment the first paver is lowered into place. It begins with a clear understanding of the surface, the ground beneath it, and the loads it will need to carry.
Pedestal placement affects far more than just the number of supports required. It influences surface stability, drainage, finished levels, maintenance access, and the long-term performance of the entire installation.
For homeowners, landscape architects, and garden designers, the best first step is something simple: draw the terrace layout before ordering materials. Mark the paver dimensions, identify each pedestal position, check ground levels, and think carefully about where rainwater runoff and future maintenance access will be needed.
Then compare the proposed spacing with the technical recommendations of the adjustable pedestal manufacturer.
A little preparation at the start can save a great deal of time, effort, and cost later. And when the finished terrace stays level, drains water properly, and feels solid underfoot, careful planning has certainly paid off.